계측기 판매전문 (주) 한일티엠입니다.

Meter Measurement Capability
10 E3 to 10 E13 ohms.
(extends to 10E14 ohms using the Concentric Ring probe).
Surface Resistivity / Surface Resistance Probe Measurement Ranges
Concentric Ring Probe
10 E4 to 10 E14 ohms/square.
Point-to-Point Probes
10 E3 to 10 E13 ohms.
Two-Point Resistance Probe
10 E3 to 10 E13 ohms.
Measurement Accuracy (of reading)
At 25 °C ±10 °C at 20% to 70% RH:
Concentric Ring Probe (152P-CR)
10 E4 to 10 E13 ohms/square,
±5% of LCD reading,
10 E14 ohms/square,
±8% of LCD reading.
Point-to-Point Probes (152AP-5P)
10 E3 to 10 E12 ohm range,
±5% of LCD reading,
10 E13 ohm range,
±8% of LCD reading.
Two-Point Resistance Probe (152P-2P)
10 E3 to 10 E11 ohm range,
±5% of LCD reading,
10 E12 to 10 E13 ohm range,
±10% of LCD reading.
Meter Probe Electrode Test Voltage
User selectable for 10 V or 100 V, ±2%.
Test Current Limit
Limited to less than 13 mA in the 10 V range and less than 1.7 mA in the 100 V range.
Test Probes (purchased separately)
A) Trek Model 152AP-5P 2.27 kg. (5 lb.) test probes (set of two probes) are available for performing resistance measurements per ANSI/ESD-STM4.1 standards (point-to-point or surface resistance measurements).
B) Trek Model 152P-CR 2.27 kg.(5 lb.) concentric ring test probe contains a preamplifier for performing surface resistance/surface resistivity measurements per ANSI/ESD-STM11-11 standards.

The exclusive Trek Model 152P-CR concentric ring measuring probe contains a pre-amplifier which eliminates the usual noise, stray pick-up, and long settling time associated with other type probe designs, therefore providing ease of operation even at very high resistance values.
C) Trek Model 152P-2P probe performs resistivity measurements on surface areas too small to be measured using conventional probes.